Choose your padel lighting controls around how the club operates, not just the price of the dimmable fixture. A court that always runs at one playing level may only need on/off control. A multi-court centre that needs separate zones, scheduled operation or different lighting scenes may benefit from a more flexible system.
The important distinction is between the driver option inside the light and the complete control installation. A dimmable fixture does not, by itself, include a controller, booking-system integration or commissioning.
Which control option suits your padel club?
| Option | Where it can make sense | What to confirm |
|---|---|---|
| On/off | One fixed lighting level with straightforward switching | Circuit arrangement, switching equipment and operating schedule |
| 0/10V or 1/10V | Compatible analogue dimming for a court or group of lights | Driver/controller compatibility, dimming range and how the lights switch fully off |
| DALI | Addressable control, groups and programmed lighting scenes | Compatible drivers, control gear, wiring, programming and any external integrations |
On/off: simple operation at one lighting level
Non-dimmable lights can be a practical choice when the lighting design provides the required playing conditions at full output and the club does not need lower-output scenes. Separate circuits or suitable switching controls can still allow courts to be operated independently.
Ask your electrical contractor to specify the switching equipment and electrical protection for the actual driver load. Do not assume an ordinary domestic dimmer can control an LED sports-lighting circuit.
0/10V and 1/10V: check the exact combination
Analogue dimming uses a control signal to adjust output. The labels do not establish that every driver and controller will behave identically. Confirm the permitted control method, minimum output, response curve, cable requirements and whether a separate switching function is needed to turn the lights fully off.
Our PDL 230 range lists a 0/10V option, while the PDL 320 range lists a 1/10V option. Have the proposed driver and controller pairing confirmed before ordering; do not treat those descriptions as interchangeable installation instructions.
DALI: useful when you need more flexible control
DALI is a digital lighting-control system. The DALI Alliance describes individual, group and broadcast control, together with programmable scenes. Those capabilities can support a club that wants a consistent way to manage several lighting zones.
However, selecting the DALI fixture option does not mean a complete building-control system is included. Confirm the controller, bus power supply where required, commissioning and any booking-system interface separately. DALI-2 certification should only be assumed where it is documented for the actual components supplied.
What do the padel fixture options cost?
These are fixture prices only, excluding VAT and transport. Controls, installation, cabling and commissioning are additional project items. The four-fixture totals are budget examples, not a lighting design for every court.
| Fixture and control | Per fixture | Four fixtures |
|---|---|---|
| PDL 230 — non-dimmable | €440 | €1,760 |
| PDL 230 — 0/10V | €449 | €1,796 |
| PDL 230 — DALI | €465 | €1,860 |
| PDL 320 — non-dimmable | €580 | €2,320 |
| PDL 320 — 1/10V | €589 | €2,356 |
| PDL 320 — DALI | €634 | €2,536 |
For four PDL 230 lights, the analogue option adds €36 and DALI adds €100 compared with the non-dimmable fixtures. For four PDL 320 lights, those differences are €36 and €216. The full installed price difference will depend on the control system as well. Our padel lighting cost guide explains the wider project budget.
Will dimming save electricity?
Reducing light output can reduce electricity use, but a dimming percentage is not a verified electricity-saving percentage. Use the actual driver power at each operating level and the hours spent at that level to estimate savings. Switching unused courts off appropriately may also reduce operating hours.
Any lower-output playing scene still needs to deliver the agreed lighting conditions. Have it checked in the court lighting report and during commissioning. Timers and occupancy controls should be designed so that players are not unexpectedly left in darkness during a booking.
Five questions to answer before ordering
- Will each court be controlled separately?
- Do you need one playing level, several approved scenes, or only switching?
- What wiring and controllers are already installed?
- Who will supply, commission and support the complete control system?
- Does the quotation identify the exact driver option, compatible controls and any integration costs?
Send us your court layout and control requirements. We can help you compare the PDL 230 and PDL 320 options and prepare a project quotation. Transport for these heavier fixtures is quoted for the project.